Teracom SolutionsOpen Store

Reliance (XR Pro)

Intrusion panels with built-in IP and 4G communication, from single-home to multi-site commercial.

DetectorsWired + 80plusUp to 176 zonesUltraSyncIP, 4G, Wi-FiMonitoring and the appArea 1 armedBack door openSmoke alarmReliance XR ProUltraSync connected
176zones on the XR Pro, from 8 on the board up through expanders
256user codes on the XR Pro, across up to 8 separate areas
800 mof cable run on the 4-wire RS-485 XR bus for keypads and modules
RCMapproved for Australia, and rated EN 50131 Grade 2 overseas
The panel and the link

Reliance XR Pro on the wall, UltraSync in the cloud

The panel does the detecting and deciding on site. UltraSync carries its alarms to a monitoring centre and lets owners and installers reach it from a phone or a browser, with no port forwarding to set up.

Armed stayAlarm: garageFront doorarmedBack doorarmedGarage rollerAlarm 02:14Lounge PIRsecureHallway PIRsecureStudy windowBypassedKitchen smoke24-hour
On site

Reliance XR Pro panel

A hybrid intrusion panel for anything from a house to a large commercial site. Wired zones, 80plus wireless detectors, keypads and expanders all report to one board, which can be programmed from a keypad, its own web page, DLX900 software or the app.

  • 8 zones on the board, 16 with zone doubling, 176 in total
  • Up to 8 areas, 256 users and 24 keypads
  • On-board 433 MHz receiver for 63-bit and 80plus devices
  • The smaller Reliance XR suits sites of up to 24 zones
UltraSyncEncrypted path per panelNo port forwardingHomeEthernetShop4G and Wi-FiWarehouseEthernet + 4GAppPortal
Cloud connection

UltraSync

The panel’s on-board Ethernet port, or the optional dual-SIM 4G and Wi-Fi module, opens an encrypted link to the UltraSync cloud. Alarms travel that way to a compatible monitoring centre, and the same link carries the UltraSync+ app and the installer portal.

  • Alarm reporting to UltraSync-connected monitoring centres
  • UltraSync+ app for iPhone, iPad and Android
  • Installer portal for remote programming and diagnostics
  • Dual-SIM 4G and Wi-Fi module for Telstra or Vodafone
What it does

What the system actually does

The Reliance XR series was built to replace NetworX and older Reliance boards in place, then add the connected features people now expect of an alarm. These are the parts our customers use most.

UltraSyncReliance XR ProXR bus and legacy NX busNX keypadNX zonesXR keypadNXG-208NNXG-508NNXG-433Older devices stay on the 3-wire bus, new ones join the 4-wire bus

Upgrade without rewiring

XR boards share the NetworX and Reliance footprint and keep the 3-wire legacy bus alongside the new 4-wire XR bus. Most existing keypads and zone expanders stay where they are, so an upgrade is often a board swap rather than a new system.

12 m, 86°, nine curtainsRF-EV1012-K480plus wireless PIRMotionZone 21, loungeCheck-inEvery 18 minutesBattery OKFive-year life

Wired and wireless detection

Hardwired zones and 80plus wireless detectors sit on the same panel. The wireless PIR covers 12 m across 86°, checks in with the panel every 18 minutes and is rated for five years on one battery, so rooms that are hard to cable are no longer a problem.

UltraSync+Alarm: Zone 3Back door, Area 1Today 2:14 amDisarmEvent historyArea 1Armed awayWindowsAll closedGeofenceLeft home 8:05

The UltraSync+ app

Arm and disarm, bypass a zone, check that doors and windows are shut and read the event history from a phone. Push alerts arrive on an alarm or a fault, and a geofence can remind you when you leave with the system still off.

KeypadShop PIROffice PIRStore PIRRear doorSmokeSirenShop, office and store: three areas

Areas and user codes

Split a site into as many as eight areas that arm and disarm separately, such as a shop floor, an office and a store room. Each of up to 256 users gets a code and permissions, and the app can issue temporary codes limited to set days and times.

Reliance XR web pageZones in use38Areas3Users22CommsIP+4GEvents this weekLatestArea 2 armed, 6:02 pmZone 7 bypassedMains restoredFirmware up to date

Program it from anywhere

Installers can program the panel from a keypad, from a PC on its built-in web page, with DLX900 software, or through the UltraSync portal and app. New XR expanders enrol themselves, and the firmware can be updated in the field.

Smoke, heat, flood and panic devicesSmoke and heat24-hour zoneSmokeKitchen, 24-hourFloodLaundryPanic pendantBedroom 1

Life safety and smart home

Besides intruder detectors the panel takes 24-hour medical and hold-up buttons, smoke and heat detectors and flood sensors. It also works with Z-Wave lights, locks and thermostats and with Alexa voice control, so a scene can run when the system arms.

The range

What the Reliance XR series includes

Panels

  • Reliance XR Pro (NXX-8-WZ-AU): 8 to 176 zones, 8 areas
  • Reliance XR (NXX-4-W-AU): 4 to 24 zones, 4 areas
  • Board-only versions to fit existing enclosures

Keypads

  • NXG-1820 touch keypad with a 3.5-inch colour screen
  • NXG-1830 and NXG-1831 LCD keypads, white or anthracite
  • NXG-1832 and NXG-1833 with a built-in Mifare DESFire reader
  • Most existing NetworX and Reliance keypads

Expanders and communication

  • NXG-208N input expander
  • NXG-508N output expander
  • NXG-433 wireless expander for 63-bit and 80plus devices
  • NXX-4G-WFSIM-AU dual-SIM 4G and Wi-Fi router

Wireless and life-safety devices

  • RF-EV1012-K4 wireless PIR, 12 m
  • RF-DC101-K4 wireless door and window contact
  • Keyfobs and panic pendants or wristwatches
  • Indoor and outdoor sirens
  • Smoke, heat and flood sensors
How it fits together

A Teracom Reliance XR system, end to end

ON SITEPANEL + CLOUDPEOPLEKeypadsTouch, LCD, MifareWired detectorsBoard and NXG-208N80plus wirelessOn-board 433 MHzLife safetySmoke, heat, floodSirensIndoor and outdoorReliance XR ProHybrid panel on siteUltraSyncEthernet or 4G linkMonitoring centreAlarm signals, 24/7Owners and staffUltraSync+ appInstallerPortal and DLX900Detectors report to the panel; UltraSync carries alarms to monitoring and lets people in from anywhere

Keypads, detectors and sirens are wired or linked back to the Reliance XR Pro. UltraSync carries its alarms to the monitoring centre, gives owners the app, and lets the installer work on the panel without a site visit.

Where we put it to work

  • Homes
  • Multi-storey residential
  • Retail
  • Offices
  • Schools
  • Aged care
  • Government
  • Warehousing
Teracom and Reliance (XR Pro)

What Teracom does on a Reliance XR job

  1. Design

    Zones, areas and users planned from the site drawings, with wired or 80plus wireless chosen room by room and the right panel size picked before anything is ordered.

  2. Install and commission

    New panels fitted, or older NetworX and Reliance boards swapped for XR boards in the same enclosure, with every detector walk-tested before handover.

  3. Connect to monitoring

    UltraSync reporting set up over Ethernet or 4G and tested end to end, so alarms reach the monitoring centre for after-hours response.

  4. Look after it

    Firmware updates, battery changes and health checks handled on a maintenance plan, so the system stays current and supported.

From Reliance (XR Pro): Reliance XR Series overview · Reliance XR Pro panel · UltraSync platform

Why Teracom works with Reliance (XR Pro)

Engineered to protect your existing investment.

UltraSync Platform

The XR Pro is part of the UltraSync family of intrusion panels, giving it a monitored IP communication path with encrypted connections rather than a bolt-on afterthought.

True Hybrid Bus Design

It runs both the newer 4-wire XR bus for current expansion modules and the legacy 3-wire NX or Reliance bus, so existing wiring and peripherals keep working.

Built for Retrofit

Panels are purpose-designed to drop into sites that already run older NX or Reliance panels, protecting a customer's existing hardware investment rather than forcing a full rip-and-replace.

Flexible Wireless Options

An onboard 433MHz receiver supports both legacy 63-bit and newer fully-encrypted 80plus wireless accessories, with an optional 4G/WiFi module for cellular backup.

Built-In Web Management

A built-in web server handles control, user administration and panel programming directly, with firmware that is field-upgradeable as the platform evolves.

The Reliance XR Pro is an intrusion alarm panel built around built-in IP communication and encrypted connections, with a single onboard 433 MHz wireless receiver that takes both legacy 63-bit devices and the newer, fully encrypted 80plus wireless range, so existing Reliance equipment stays compatible as a site upgrades. It runs on the UltraSync platform for a monitored communication path with multiple levels of redundancy, and stores user codes on the panel itself as an added layer of security. An optional dual-SIM 4G/Wi-Fi module adds cellular alarm reporting and remote connection over the mobile network, and the panel is NBN-ready.

The XR Pro scales from 16 zones up to 176, with up to 256 user pin codes, suiting everything from a single residence through to multi-storey, education, retail, government, aged care and warehousing sites. Native IP camera support and Z-Wave compatibility bring camera integration and automation -- lights, door locks, heating -- into the same system, controllable either through compatible touchscreens like the XR Touch or via the UltraSync+ mobile app, which lets a user arm and disarm the system, check door and window status, and view live or recorded camera footage from anywhere.

Reliance (XR Pro) product imagery
Teracom Store

Reliance (XR Pro) in the store.

83 products. Search the whole store

Prices shown are RRP. Create a free account for additional member discounts.

Showing 24 of 83

Interested in Reliance (XR Pro) products?

Visit the Teracom Store for current stock, pricing and availability.

Visit the Store