Kantech

Access control hardware and EntraPass management software.

40+Years in access control
400+Doors per system
20+Tasks via mobile app
EntraPassThree editionsDoors, video, alarmsKT-4PoE and Wi-Fi100,000 users on boardCard grantedDoor heldArea armedAES-128 reader linkVideo with Exacq
100,000users held on a single KT-2 or KT-4 door controller
128KT controllers linked to EntraPass through one KT-NCC Gen 2
AES-128encryption on the link between ioSmart readers and the controller
150 mline-of-sight range for ioSmart wireless gate and panic transmitters
Two ways to run it

On its own, or under EntraPass

The same KT controllers and readers work either way. A small site can run a controller by itself from a browser, and move to EntraPass later without replacing the hardware on the doors.

No server neededReaderDoor lockExit buttonDoor reedKT-2Runs in a browserCardholders and schedulesOne or two doors100,000 usersDecides offline
Standalone

KT-Standalone

KT-1 and KT-2 controllers have a web page built in, so cardholders, schedules and access rules are set up on the controller itself. There is no server and no software licence, and the controller keeps deciding at the door when the network is down.

  • KT-1 for a single door, powered over the network cable
  • KT-2 for two doors, found on the network automatically
  • Suits small offices, shops and remote doors
  • Moves to EntraPass later on the same hardware
EntraPassKT-NCC Gen 2Up to 128 KT controllersKT-4 HQKT-4 L2KT-2 DepotKT-1 GateExacq NVRDSC panelRemote sites keep running on their own if the link to the server drops
Networked

EntraPass

EntraPass is the management software for networked Kantech systems. One edition fits a single controller and one workstation, and the largest runs unlimited doors and workstations across many sites, with video and alarm panels in the same screens.

  • Special Edition for one controller and one workstation
  • Corporate Edition for growing, multi-site organisations
  • Global Edition with load balancing, failover and a Redundancy Server
  • Web App and EntraPass Go for browsers and phones
What it does

Doors, alarms and video from one place

Kantech keeps the hardware simple to install and puts the rest in EntraPass. These are the parts our customers notice most.

ioSmartPhoneioProx tagHID cardAccess granted08:31 Card, Foyer08:12 Phone, L207:55 Tag, Store07:40 Denied, Lab

Encrypted ioSmart readers

ioSmart readers use MIFARE DESFire EV1 and EV2 cards that must prove themselves to the reader, which makes cloning far harder than with proximity cards. The link to the controller is AES-128 encrypted, OSDP is supported, and the same readers take Bluetooth phone credentials.

EntraPass GoDoor heldRear exit · DandenongJust nowLock doorView videoDoorsLock, unlockCardsAdd, photoPartitionsArm, disarm

The system in your pocket

The EntraPass Go app for iPhone and Android locks and unlocks doors, adds cards with a photo taken on the phone, arms and disarms alarm partitions and shows live and recorded video from Exacq recorders, on Corporate and Global Edition systems.

Go Install · KT-4 testSupply13.7 VReader 1OKDoor 2 contactOpenWi-Fi linkGoodWi-Fi signalCommissioningKT-4 found on Wi-FiReader 1 test passedDoor 2 contact openLock relay 1 tested

Commissioned from a phone

The EntraPass Go Install app connects to KT-1, KT-2 and KT-4 controllers over Wi-Fi so our technicians can set them up, test readers and doors, and check voltage and inputs at the door without a laptop. Wiring faults show up before handover, not after.

ArmedWarehouse areaFront doorLocked 17:45Office PIRArmedWarehouse PIRArmedRoller doorOpened 23:12Rear exitLockedStore roomBypassed

Alarm partitions at the door

An alarm panel can connect straight to a KT-4, so partitions are armed and disarmed through the access control system. EntraPass also works with DSC PowerSeries, PowerSeries NEO and MAXSYS panels, putting door and alarm events on one screen.

Rear exit · access denied · last 24 hours4 clips22:41Rear exit cam22:39Car park PTZ22:42Corridor 222:44Loading bayExacq clips paired with the access event in EntraPass

Video beside every badge

Video Vault links Exacq video to EntraPass, so every access event comes with its clip. Search by cardholder, door or time and play the footage in the same window, which makes an audit or an investigation a few clicks instead of two systems.

Up to 150 m line of sightioSmart receiverTwo or four buttonsGate openedButton 1 · 07:42Roller doorButton 2 · 07:43Panic alertButton 4 · 22:10

Gates and panic buttons

ioSmart wireless transmitters open gates, roller doors and boom gates from a car, and a button can be set aside as a panic or duress alert. Rolling codes stop the signal being copied, and the receiver wires into a KT controller like any other input.

The range

What Kantech makes

Controllers

  • KT-1 single-door controller
  • KT-2 two-door controller
  • KT-4 four-door controller with PoE and Wi-Fi
  • KT-NCC Gen 2 network gateway
  • Starter and expansion kits

Readers and credentials

  • ioSmart smart card and multi-technology readers
  • ioProx proximity readers, cards, tags and stickers
  • ShadowProx and Indala proximity readers
  • Support for existing HID cards
  • EntraPass mobile credentials for phones and Apple Watch

Software and apps

  • EntraPass Special, Corporate and Global Editions
  • EntraPass Web App
  • EntraPass Go and Go Install apps
  • Redundancy Server, Card Gateway, Active Directory and Video Vault

Door hardware and wireless

  • ioSmart wireless receiver and transmitters
  • Electric strikes and electromagnetic locks
  • Input and output modules
  • Telephone entry systems
  • Salto wireless lock integration
How it fits together

A Teracom Kantech system, end to end

ON SITEPLATFORMPEOPLEioSmart readersCard and phoneKT controllersKT-1, KT-2, KT-4Exacq recorderLinked videoAlarm panelPartitionsTransmittersGates and panicEntraPassThree editionsKT-NCC Gen 2Multi-site gatewayWeb and Go appsBrowser and phoneSecurity deskEntraPass workstationManagersEntraPass Go appStaffCard or phoneMonitoring centreAfter-hours alarmsDoors, alarm partitions and video in one system, from a single door to many sites

Readers, KT controllers, an Exacq recorder and the alarm panel report to EntraPass, with KT-NCC Gen 2 gateways joining remote sites. Managers work from the desk or the EntraPass Go app, and alarms can come through to our monitoring centre after hours.

Where we put it to work

  • Commercial offices
  • Retail
  • Schools
  • Medical clinics
  • Apartment buildings
  • Warehousing and logistics
  • Local government
  • Car parks and depots
Teracom and Kantech

What Teracom does on a Kantech job

  1. Design

    Doors, controllers and readers planned from the site drawings, and the right setup chosen, standalone or EntraPass and which edition, before anything is ordered.

  2. Install and commission

    Controllers, readers and locks installed and wired, set up and tested door by door with the Go Install app, and access levels programmed before handover.

  3. Connect to monitoring

    Door and alarm events can come through to our monitoring centre for after-hours response.

  4. Look after it

    Software updates, firmware, cards and health checks handled on a maintenance plan, so the system stays current and supported.

Why Teracom works with Kantech

Access control that scales from one door to thousands.

One Software, Any Scale

EntraPass scales from Special Edition for a single-controller office up to Global Edition for thousands of doors across airports and government facilities, all in the same software family.

Encrypted at the Door

ioSmart readers use AES 128-bit encryption and mutual authentication between card and reader, protecting against credential cloning at the point where access control systems are most often attacked.

Running in Minutes

The KT-1 controller is PoE-powered with single-button enrollment and built-in web configuration -- connect it to an IP network and it's ready, with no dedicated host system required in standalone mode.

Upgrade Without Starting Over

Sites can move from EntraPass Special Edition to Corporate or Global Edition as they grow, protecting the original controller investment instead of ripping out hardware to scale up.

Mobile-First Management

The EntraPass mobile app gives operators real-time control of more than 20 security tasks -- creating cards, locking or unlocking doors, arming partitions and viewing live video -- from a phone.

Kantech is an access control brand within the Tyco Security Products portfolio -- one of the largest security product portfolios in the world, spanning video security, access control, intrusion and location-based security. The Kantech range covers door controllers (including the KT-1 and KT-400 families), card and key fob readers, and the EntraPass management software, which handles cardholders, access levels, schedules, video and reporting from a single application, with a mobile app for installers and administrators managing systems on the go.

Want to know more about why we chose to work with Kantech? Contact us.

Kantech product imagery

Interested in Kantech products?

Visit the Teracom Store for current stock, pricing and availability.

Visit the Store